Garage Door Track Adjustment 

Garage Door Track Adjustment 

A garage door is durable equipment yet can be sensitive.

It can jam at times, where you will find trouble opening or closing it.

Probably you have bumped your garage door with your car before – that’s why it is suddenly out-of-alignment.

As a homeowner, an out of alignment garage door can be a frustrating problem, especially if it’s jammed that you suddenly find yourself locked in or out of your garage.

Because of this, you need to fix your garage door sooner than later.

Aligning your garage door is a must to deal with this problem.

Don’t fret since we will guide you through the steps on how to perform a garage door track adjustment.

Bring your tools and equipment to get ready for the adjustment.

The Basic Procedure of Adjusting Garage Door Tracks

When you have an out-of-alignment garage door, you need to pay attention to the tracks.

Besides, they are responsible for allowing your garage door to move in place.

As soon as you find your garage door track needs adjustment, you need to perform these steps to get it back into place.

Don’t worry; it only involves three steps.

You also don’t need to use expensive tools or hire a garage door repair expert.

1. Loosen

The first step when adjusting a garage door track is to loosen it.

Loosen the screws found on the tracks that secure the garage door frame.

Use a screwdriver to loosen the screws.

Make sure that the screws are loose to make room for adjustments later on.

2. Adjust

After loosening the screws, adjust the track using a rubber mallet.

Apply substantial force at the bottom part of the garage door track to position it back to place.

Use a level tool to ensure you position the track correctly.

In this way, you won’t have to trouble yourself repeating the same step because of potential errors.

3. Tighten

Once done adjusting the track, tighten the screws.

Then, you’re done.

Repeat the steps above on the other track, especially if it needs adjustment.

Other Cases You Need a Garage Door Track Adjustment

A garage door track adjustment is an easy process.

However, take note that there are other ways you can adjust your garage door track depending on the problem.

For this reason, we will walk you through the different adjustment problems with a garage door track that you need to address right away.

Crooked Garage Door

A crooked garage door means that it won’t straighten when it moves.

It might be wonky when it opens.

Here’s what to do when dealing with a crooked garage door:

1. Inspect the springs and cables

Springs and cables are vital components of a garage door.

However, these components can be contributing to your crooked garage door.

Inspect if you have jumped cables.

If you confirm this is the case, you need to repair or replace the cables immediately.

If it’s too daunting for you, you can call a garage door repair expert in Pittsburgh, such as Pitt Overhead Garage Door Repair, to perform the fix for you.

2. Check the tracks

Inspect if the tracks are worn-out since this problem is what is causing your garage door to get crooked.

If this is likely the case, the best way to address the issue is to fix or replace them.

Also, inspect if there is debris obstructing the movement of the garage door.

Remove as soon as you find it.

Binding Garage Door

A binding issue happens when it is difficult to open or close your garage door.

To solve this issue, follow the steps below:

1. Loosen

Fixing a binding garage door only requires the basic steps of adjusting a garage door track.

First, loosen the screws that are securing the tracks.

2. Adjust

Then, adjust the tracks using a rubber mallet.

This step will help to position them in the correct position.

Don’t forget to use a level that ensures proper garage door track adjustment.

3. Tighten and Adjust

Lastly, tighten the screws so that the tracks won’t move.

Repeat steps 1 to 3 for the other track to achieve a balanced garage door.

Gapping or Rubbing Garage Door

If you find your garage door is rubbing against the molding, this can lead to worst issues.

This is also true for a gapping garage door.

These problems are likely to affect other garage door parts, resulting in a garage door installation or repair.

To prevent this from happening, perform the steps similar to fixing a binding garage door.

Watch this video also on how to do it accurately.

However, if the procedure did not improve your garage door, it’s always best to call a garage door repair expert to make the adjustments for you.

Repair Your Garage Door Track As Soon As Possible

Adjusting a garage door track is a simple process.

However, it certainly needs a degree of expertise to pull off the job.

If you find the process is too advanced for you, you can call a garage door repair in Pittsburgh to assist you.

You can count on Pitt Overhead Garage Door Repair.

If it’s the garage door track adjustment you need, we can do it for you.

We also provide other garage door services such as residential and commercial garage door installation, repair, maintenance, and tune-up.

Call us now to enjoy our services!

Recommended articles